I used the Meshcore Canada observer site to load my Heltec V3 Its running fine however I was asked to add the following to my Heltec. I do not have a linux machine to log on and edit the config file. Any ideas
sudo nano /etc/mctomqtt/config.d/00-user.toml
Copy/paste the config
Then ctrl x → y (yes) then enter (save/close)
Then restart with this command
[[broker]]
name = “ve7kod-dev”
enabled = true
server = “mqtt-dev.ve7kod.ca”
port = 443
transport = “websockets”
[broker.tls]
enabled = true